The AP-2 Power Panel provides both constant and switched power sources. Devices such as GPS and radio memory which need to be "kept alive", even when the bike is off have their own "constant power" fuses with three outputs fed by two fuses. These outputs can supply approximately 20 Amps but are normally fused at minimum to protect the small wires which feed these devices.
- Capacity up to 50 Amps (20 constant, 30 fused)
- Plated contacts, stainless steel hardware
- ATC Type Fuses (included)
- Lugless connector clamps
- Instructions and hardware included
- Optional AP-130R Relay & Wiring Kit available
- One year warranty
The AP-2 is internally separated into 2 separate input/output sections with 2 hot input terminal posts. One post is fed directly from battery power and feeds 3 output circuits (2 fuses) which are always hot, and the other post is fed from a relay and feeds 5 output circuits (3 fuses) which are only on when the bike is on.
So if you'd like to have some circuits always hot, for purposes like charging your battery or leaving the GPS on when you switch the bike off, the AP-2 provides for those features.
Only on the AP-2 can you have both switched and unswitched outputs.
